note:
If programmed for the optional Vehicle Recovery
System (VRS®) feature, arming with the transmitter will
arm the VRS® feature. (See VRS® section of this guide.)
L
_
~
disarming
To disarm the system, press
t~liJ.
You will hear two chirps,
and the parking lights will flash twice. If the power locks are
connected to the system, the doors will unlock. If the siren chirps
either four or five times when disarming, refer to the Diagnostics
section of this guide. This is called Tamper Alert.
r:.!
high security disarm
.------1
This security system offers High Security Disarm. High Security
Disarm is a feature that makes it possible to silence and reset the
system while it is triggering, without disarming the system. If the
system is triggered and the siren has been sounding for longer
than six seconds, pressing
[i/;-~:~::--~J
on the remote transmitter will
stop the trigger and return the unit to the armed state. The
system will not disarm, but rather reset. This prevents you from
disabling the system should you wish to disarm it without visu-
ally checking the vehicle. Pressing
ii~
_ _
~ ~~~J,
after resetting the
system, will disarm the system; pressing this button during the
first six seconds of the triggered sequence will disarm the security
system immediately. The six second timer is provided for your
convenience, in case the system is accidentally triggered.
©
2005 directed electronics. inc. all rights reserved
11
Need help?
Do you have a question about the Python 460HP and is the answer not in the manual?