Table of Contents
Advertisement
4. Monitoring and Configuring the Printer
Display of procedure for using commands
msh> help "command_name"
hostname
Use the "hostname" command to change the printer name.
View settings
msh> hostname
IPv4 Configuration
msh> hostname "interface_name" "printer_name"
• Enter the printer name using up to 63 alphanumeric characters.
• You cannot use a printer name starting with "RNP" or "rnp".
• The Ethernet interface and wireless LAN interface will have the same printer name.
• wlan can be specified only when the wireless LAN interface unit is installed.
4
ether
wlan
Initializing the printer name for each interface
msh>hostname "interface_name" clear "name"
ifconfig
Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet mask, broadcast ad-
dress, default gateway address) for the printer.
View settings
msh> ifconfig
IPv4 configuration
msh> ifconfig "interface_name" "parameter" "address"
• If you did not enter an interface name, it is automatically set to the Ethernet interface.
• wlan can be specified only when the wireless LAN interface unit is installed.
ether
148
Interface name
Interface name
Interface configured
Ethernet interface
Wireless LAN interface
Interface configured
Ethernet Interface
Advertisement
Table of Contents
