Setting The Clock - KTM 690 SMC R EU 2015 Setup Instructions

3 WORK
3.13

Setting the clock

3.14 Setting kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
Making the setting according to the country.
–
Press the SET button
The fuel level warning lamp
play returns to the previous display mode.
Info
If you do not press the SET button
after approx. three minutes.
401429-10
Condition
The motorcycle is stationary.
–
Switch on the ignition by turning the ignition key to position ON
–
Press the MODE button repeatedly until the ODO mode is active.
–
Keep the MODE button and the SET button pressed simultaneously.
The time display begins to flash.
–
Press the MODE button to set the hour.
–
Press the SET button to set the minute.
–
Keep the MODE button and the SET button pressed simultaneously.
The time is set.
401444-01
Condition
The motorcycle is stationary.
–
Switch on the ignition by turning the ignition key to position ON
–
Press the MODE button repeatedly until the ODO mode is active.
–
Keep the MODE button pressed until the display mode changes from km/h to mph or
from mph to km/h.
401444-01

for two seconds.

switches off. TRIP F is set to 0.0 and the dis-

, the reset takes place automatically
12
.
.