Advertisement
2.
INTRODUCTION
High output unit suitable for the professional workshop. Fitted with two genuine 3hp motors and two identical pumps. Twin capacitors
and a centrifugal switch aid trouble-free starting on a 230V 32A supply. This unit is supplied with a control box featuring a stepped start
up to prevent high Amp spikes. Pumps feature heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and
long-life. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling.
3.
SPECIFICATION
Model No:
Air Displacement cfm(L/min):
Maximum Free Air Delivery
cfm(L/min):
Maximum Pressure:
Minimum Rated Supply:
Motor Output:
Outlet:
Phase:
Plug Type:
Receiver Capacity:
Size (W x D x H):
Speed:
Supply:
4.
PREPARATION
4.1.
Remove compressor from packaging. If anything is found to be missing or damaged, contact your supplier.
4.2.
Check the mains voltage corresponds with the voltage shown on the compressor data plate.
4.3.
A qualified electrician should fit a suitable 3 pin industrial plug.
4.4.
Position the compressor on a flat surface with a maximum incline of 10° (FIG.1). DO NOT lift the compressor with hooks or ropes.
4.5.
Position in a well ventilated area, at least 100cm from any wall (FIG.2). Keep the compressor away from atmospheric pollution/hazards.
4.6.
Ensure the compressor is secure and cannot fall. Optional anti-vibration feet can be purchased from your Sealey stockist (FIG 3).
FIG.4 - SAC1276B
4.7.
Remove the plastic transit plug from the oil filler hole (FIG.4 & FIG.5) and replace with the filler/breather plug.
4.8.
Check the oil level by observing the sight glass (FIG.4 & FIG 5). Top up with synthetic oil so the oil level is at the maximum mark.
DO NOT use mineral oil in these compressors.
8
DO NOT overfill.
8
© Jack Sealey Limited
SAC1276B
SAC2276B
26.8(759)
30(850)
19.4(549)
21.8(618)
145psi(10bar)
145psi(10bar)
32A
32A
3hp (x2)
3hp (x2)
3/4"BSP Female Tap
3/4"BSP Female Tap
1ph
1ph
Bare Wire
Bare Wire
270L
270L
1550 x 540 x 935mm
1550 x 540 x 960mm
1636rpm
1280rpm
230V/32A
230V/32A
FIG.1
Original Language Version
SAC1276B illustrated (SAC2276B differs slightly)
1. Direct Compressed Air Outlet
3. On/Off Switches
5. Pressure Gauge
FIG.2
FIG.5 - SAC2276B
SAC1276B, SAC2276B
2. Tank
4. Reset
6. Condensate Drain Tap
FIG.3
Issue 5 (ALL)
18/08/23
Advertisement
