Control Unit Atbcontrol © 3 - Connect; General Information On Operation - ATB AQUAMAX BASIC Operating Instructions Manual

Operating instructions AQUAMAX
Control unit ATBcontrol
Features
Features
Microprocessor controlled

USB connection for data readout and input

 Splash water protected. Conditionally suitable for outside areas (IP54)
 Wall mounting
Voltage failure detection system (UVS

Floating contact for an additional alarm facility

Simple and rapid operation

 Times for all parameters completely pre-programmed
Automatic run-in phase with suppression of excess sludge removal

Parameter settings freely selectable

 Alarm interval
 Alarm volume adjustable
Deployable for AQUAMAX

Plug-in

Winter operation and sludge removal mode for the reduction of the aeration times

 Mobile access via internet browser (e.g. with smartphone or tablet) via WiFi-Direct

General information on operation

The operation of the control unit takes place via three short-stroke keys. By pressing a key the
display illumination is switched on (lapses if no key is operated within 5 minutes).
Key functions:
↑↓ Scroll upwards or downwards / menu selection
OK Transition of cursor to the character, which is to be changed / value input is saved /
selection of menu point / menu setback.
With temperatures below 0°C a severely limited function of the LC display is to be anticipated.
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-No.: 9060 0270 / Status: 09.06.2023 / Page 9 from 36
BASIC/CLASSIC
®
3 - Connect
©
)
®
BASIC / CLASSIC
®