Table of Contents
Advertisement
Setting the oven
There are various ways in which you can set your oven. Here
we will explain how you can select the desired type of heating
and temperature or grill setting.
Types of heating and temperature
Example in picture: Top/bottom heating, 190 ºC.
Use the function selector to select the required type of
1.
heating.
Use the temperature selector to set the temperature or the
2.
grill setting.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
The oven heats up.
Switch off the oven
Turn the function selector to the off position.
Changing the settings
You can change the type of heating, temperature and grill
setting as required.
Rapid heating
With rapid heating, the oven reaches the temperature selected
more quickly.
Only use rapid heating when temperatures above 100 °C are
selected.
Only place the food in the oven after rapid heating has finished,
so as to ensure even cooking.
Move the function selector to the
1.
Use the temperature selector to set the temperature.
2.
The oven starts after a few seconds. The indicator lamp above
the temperature selector lights up.
The rapid heating process is complete
The indicator light above the temperature selector goes out.
Place your dish in the oven and select the desired type of
heating.
Cancelling rapid heating
Turn the function selector to the off position. The oven switches
off.
Wash new sponges thoroughly before first use.
Wipe the appliance with plenty of water and
Stainless steel
some washing-up liquid. Always wipe parallel
fronts
to the natural grain. Otherwise, you may
scratch the surface. Dry with a soft cloth.
Remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately. Do
not use any abrasive materials, scouring
sponges or rough cleaning cloths. The stain-
less steel fronts can be polished using a spe-
cial care product. Follow the manufacturer's
instructions. You can purchase special stain-
less steel cleaner from our after-sales service
or from specialist retailers.
Wipe the appliance with some washing-up liq-
Enamel sur-
uid and warm water. Dry with a soft cloth.
faces and lac-
quered
surfaces
Wipe the appliance with some washing-up liq-
Knobs
uid and warm water. Dry with a soft cloth.
Can be cleaned with glass cleaner. Do not
Glass panel
use any abrasive cleaning agents or sharp
metal objects. These could scratch and dam-
age the surface of the glass panel.
Wipe with a damp cloth. Dry with a soft cloth.
Seal
position.
J
7
Advertisement
Table of Contents
