ONDERDELEN LIJST—Modelnr. WEBE35560 R0796A BELANGRIJKE VOORZORGSMAATREGELEN Key No. Qty. Description Key No. Qty. Description WAARSCHUWING: Om het risico van verwondingen te vermijden, dient u voor het gebruik van de M10 x 72mm Bout “U” Bracket Weight Bench de volgende veiligheidsmaatregelen door te lezen.
MONDAY Date: Fijn dat u de WEIDER ® PRO 355 Weight Bench hebt Het model nummer is WEBE35560. Het serie nummer gekozen. De veelzijdige PRO 355 Gewichtsbank is staat op een sticker die op de WEIDER ® PRO 355 ontworpen zodat u uw eigen gewichten kunt gebruiken...
SPIERKANT ONDERDELEN IDENTIFICATIE KAART Deze kaart is ontworpen om U te helpen bij het identificeren van onderdelen die bij het opstellen worden gebruikt. Het nummer tussen haakjes is het nummer van het onderdeel. Het tweede nummer is het aantal dat in de montage wordt gebruikt.
Met iedere strek oefening door: u de onderdelen in de getoonde positie plaats wan- probeer zo soepel mogelijk te bewegen en sterk neer u de WEIDER ® 130 monteert. zover u kunt zonder dat u pijn veroorzakt. Het streken •...
2. Press a 2” Square Inner Cap (46) into the Left ADVIES VOOR HET OEFENEN Upright (18). Press four 1” Round Inner Caps (39) into the Left Upright. VIER VERSCHILLENDE OEFENINGEN HET PERSONALISEREN VAN UW TRAININGS- Slide the Left Upright (18) onto the indicated M8 x PROGRAMMA 60mm Carriage Bolts (3).
Page 8
5. Slide the Weight Carriage (52) onto the Main ATTACHING THE LAT BAR OR NYLON STRAP TO Upright (42). The bracket must be on the side THE HIGH PULLEY STATION shown. Attach the Lat Bar (36) to the Cable (51) with a Cable Press a 2”...
Page 9
9. Route the Cable (51) around the indicated Pulley BIJSTELLEN VAN DE PRO 355 (24). Tighten the M10 Nylon Locknut (2) and the M10 x 120mm Bolt (not shown). Do not overtighten the Nylon Locknut. Be sure that both Cable De gewichtsbank is ontworpen om u de gelegenheid te geven om uw eigen gewichten te gebruiken.
Page 10
1/2” x 1 1/8” Spacers (47), and an M10 Nylon Locknut (2). the Adjustment Weight Rests (37). The use of all remaining parts will be explained in ADJUSTING THE WEIDER PRO 355 beginning on page 12 of this manual.
Need help?
Do you have a question about the WEBE35560 and is the answer not in the manual?
Questions and answers