Table of Contents
Advertisement
en Installation instructions
For handleless kitchens with vertical bar handle
3.
strips:
Attach a suitable filling piece
‒
any sharp edges and to guarantee a safe install-
ation.
Pre-drill aluminium profiles to establish a screw
‒
connection
.
Secure the appliance using a suitable screw
‒
Note: The gap between the worktop and the appliance
must not be closed by additional battens.
Thermal insulation strips must not be fitted to the side
panels of the surround unit.
30.9 Removing the appliance
Disconnect the appliance from the power supply.
1.
Undo the fastening screws.
2.
3.
Lift the appliance slightly and pull it out completely.
46
in order to cover
.
Advertisement
Table of Contents
