Siemens HM776G1 1B Series User Manual And Installation Instructions page 17

Table of Contents

Advertisement

WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot dur-
ing operation.
Never touch these hot parts.
Keep children at a safe distance.
Place the empty cookware in the cooking compart-
1.
ment.
Set the appliance to run for 30 seconds to 1 minute
2.
at maximum power.
Start the operation.
3.
Check the cookware several times:
4.
If the cookware remains cold or warm to the
touch, it is suitable for microwave use.
If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
11.2 Setting options with the microwave
You can use the microwave on its own or in combina-
tion with a different operating mode.
Microwave-only operation
The electromagnetic waves of the microwave alone
generate energy and this is converted into heat in food,
for example.
To prevent condensation, when the microwave power
setting is 600 watts and 800 watts, the appliance auto-
matically switches on a heating element. The cooking
compartment and the accessories become hot. The
cooking result is not affected by this.
You can switch off this automatic drying function in the
basic settings.
→ "Basic settings", Page 20
WARNING ‒ Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot.
Keep children at a safe distance.
Added microwave
Adding microwave to an operating mode reduces the
cooking time.
You can combine the microwave with the following
functions:
¡ Types of heating → Page 14
– 4D hot air
– Top/bottom heating
– Circulated air grilling 
– Grill, large area
– Grill, small area
¡ Meals → Page 18
¡ Crisp Finish → Page 18
The potential microwave power settings in combination
with an operating mode are:
¡ 90 watts
¡ 180 watts
¡ 360 watts
11.3 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 11
¡ → "Cookware and accessories with microwave",
Page 16
Press "Microwave".
1.
Or select the microwave directly using the
ton.
2.
Press the required microwave output setting.
Press "Cooking time".
3.
A cooking time must always be set in order to oper-
ate the microwave.
To change the preset cooking time, press the relev-
4.
ant time value, e.g. minute display "min" or second
display "s".
a The selected value is marked in blue.
Set the cooking time using
5.
ment bar. Or enter the cooking time directly via the
number field
⁠ .
If required, use
to reset the adjustment value.
Press "Apply".
6.
Use
to start the operation.
7.
a The microwave starts and the cooking time counts
down. The display shows the performance reduction
→ "Microwave output settings", Page 11 for the
maximum microwave output. "Boost"
a Once the cooking time has elapsed, a signal tone
sounds. A notification appears on the display con-
firming that the operation has finished.
8.
Once the cooking time has elapsed:
If required, you can select other settings and re-
start the operation.
When the food is ready, use
pliance off.
If you have switched off the drying function for the
9.
microwave in the basic settings, dry the cooking
compartment.
→ "Drying", Page 27
Note: If you open the appliance door during operation,
the operation stops. If you close the appliance door,
you must continue the operation. If you have changed
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
→ "Basic settings", Page 20
Changing the microwave output setting
You can change the microwave output at any time.
Press the microwave output setting.
1.
Change the microwave output setting.
2.
3.
Press "Apply".
Changing the cooking time
You can change the cooking time at any time.
Press the cooking time.
1.
Change the cooking time using
2.
adjustment bar. Or enter the temperature directly via
the number field
⁠ .
3.
Press "Apply".
Microwave en
but-
or
or via the adjust-
to switch the ap-
or
, or via the
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hm776g1b1b

Table of Contents