Table of Contents
Advertisement
Operating
7.4 Settings menu
How to access the settings menu
Dimmer start
Frequency
Pan zero position setting (pan offset)
Gawan 200
22
Moving Head
The following basic settings can be adjusted in the settings menu:
Dimmer start
n
Frequency
n
Pan zero position setting (pan offset)
n
Tilt zero position setting (tilt offset)
n
Colour wheel zero position setting (colour offset)
n
Gobo zero position setting
n
Prism1 zero position setting
n
n
R prism1 zero position setting (R prism adjustment)
Prism2 zero position setting
n
R prism2 zero position setting (R prism adjustment)
n
Frost zero position setting (frost adjustment)
n
Focus zero position setting
n
1.
Press [Menu].
2.
Press and hold [ENTER] for 3 seconds.
ð The settings menu opens up.
3.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'Dimming Start'.
3.
Use [UP] and [DOWN] to select a value between 0 and 999.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'Frequency(Hz)'.
3.
Use [UP] and [DOWN] to select a value between 1072 and 1327.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
1.
Open the settings menu.
2.
Navigate to 'Pan'.
3.
Use [UP] and [DOWN] to select a value between 128 and 127.
4.
Confirm your selection with [ENTER].
ð The settings are saved and immediately effective.
5.
To exit the settings menu, press [MENU], or wait 30 seconds.
Advertisement
Table of Contents
