Table of Contents
Advertisement
5
Starting up
Connections in 'DMX' mode
Create all connections while the device is off. Use the shortest possible high-quality
cables for all connections. Take care when running the cables to prevent tripping
hazards.
Connect the DMX input of the device to the DMX output of a DMX controller or
another DMX device. Connect the output of the first DMX device to the input of the
second one and so on, to form a series connection. Make sure that the output of the
last DMX device in the chain is terminated by a resistor (110 Ω, ¼ W).
Starting up
2 3 4
1
5
Gawan 200
11
Moving Head
Advertisement
Table of Contents
