Control; Structure Of The Menu - Ignition LED PAR 56 Floor WCA 36x1W Manual

5. Control

Press MENU to get to the menu. With UP/DOWN you can select the required point of menu. Confirm Press MENU to get to the menu. With UP/DOWN you can select the required point of menu. Confirm Press MENU to get to the menu. With UP/DOWN you can select the required point of menu. Confirm
your selection with ENTER. With UP/DOWN you can make your settings after this confirm your your selection with ENTER. With UP/DOWN you can make your settings after this confirm your your selection with ENTER. With UP/DOWN you can make your settings after this confirm your
settings with ENTER.

5.1. Structure of the menu

Structure of the menu
Menu Submenu 1
DMX ADD A001 – A512
ON
SETUP DISP
OFF
SETUP DIM 000% - 100%
WW
COLORSET CW
AMB
Reset
MODE 1
MODE 2
MODE 3
DMX MODE 4
MODE 5
MODE 6
SLAVE
PROGRAM 001 – 008
SPEED 000 – 031
SOUND 000 – 031
Submenu 2 Subm Function
Setting the DMX address.
Display stays always on.
Display shuts down after 10s.
Dimmer 0 – 100%.
000% 000% - 100% Dimmer warm white 0 – 100%.
000% 000% - 100% Dimmer cold white 0 – 100%.
000% - 100% 000% Dimmer Amber 0 – 100%.
Reset
Choosing a DMX mode.
Set the device as slave.
Choosing an automatic program.
Strobe fast – slow.
Microphone sensitivity low - high
8 / 12