Table of Contents
Advertisement
Troubleshooting
10
Troubleshooting
Gawan 200
34
Moving Head
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not
use ordinary microphone cables.
Never connect the DMX input or output to audio devices such as mixers
or amplifiers.
In the following we list a few common problems that may occur during operation.
We give you some suggestions for easy troubleshooting:
Symptom
The unit does not work, no
light, the fan does not run
No response to the DMX con‐
troller
If the procedures recommended above do not succeed, please contact our Service
Center. You can find the contact information at www.thomann.de.
Remedy
Check the mains connection and the main fuse.
1. Check the DMX connectors and cables for
proper connection.
2. Check the address settings and the DMX
polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or
alongside to high voltage cables that may cause
damage or interference to DMX interface circuits.
Advertisement
Table of Contents
