Table of Contents
Advertisement
7
Operating
7.1 Starting the device
7.2 Main menu
How to use the main menu
Setting the DMX address
Specifying the DMX mode
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce
very bright light. This is also valid immediately after you turn on the
device, when the device operates in automatic mode or under remote
control and when you turn off a DMX controller that is connected to the
device. Persons staying near the device could be injured or frightened.
Before you turn on the device and during the operation, always ensure
that nobody stays close to the device. If work has to be performed in the
area of movement or in the near vicinity of the device, it must remain
turned off.
Connect the device to the power supply to start operation. After a few seconds, the
fans start to work, the head moves to the home positions for rotation (pan) and incli‐
nation (tilt). After a few more seconds, the device will perform the last automatic
show. The name of the set show appears on the display, e.g. 'Show 1' .
1.
To enter the main menu, press [MENU].
2.
To scroll between the individual menu items, press [UP] and [DOWN]. To open
the selected menu item, press [ENTER].
3.
To exit the menu, press [MENU], or wait 30 seconds.
ð All previous settings are retained even when the device is switched off and
disconnected from the mains.
4.
To restart with default values, use the functions under 'Reset Functions' in the
main menu.
1.
Open the main menu.
2.
Navigate to 'DMX Settings è DMX Address'.
3.
Use [UP] and [DOWN] to select an address between 001 and 495.
4.
Confirm your selection with [ENTER].
ð The desired address is saved.
5.
To exit the menu, press [MENU], or wait 30 seconds.
The device can only be controlled in 18-channel mode. To specify the mode, proceed
as follows:
1.
Open the main menu.
2.
Navigate to 'DMX Settings è DMX CH Mode'.
3.
Use [UP] and [DOWN] to select 'Mode1(18)' .
Operating
Gawan 200
13
Moving Head
Advertisement
Table of Contents
