Before You Start; Tools Needed - Sim-Lab P1-X PRO COCKPIT Instruction Manual

BEFORE YOU START:

Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions
on assembly. This requires only a set of simple tools and some of your time. Please check the bill of
materials before starting (pages 23/24) and make sure all the parts are delivered.
For the angled profiles, the lengths in the bill of materials might not perfectly match the length of the
part you measure. Don't worry, we measure differently when cutting the profiles and with the angles as
they are, the given dimensions are a close approximation.
We tried to go with a different style of assembly for this one. Don't panic if you can't find any
corner brackets included in the hardware bags.
Inserting Slot-Nuts:
You got excited, finished the build, put the caps on, but forgot to install
one element. Do not worry. It happens to everyone. In this diagram, you
can see how to insert a Slot-Nut directly into the slot from the side.
You can also use one of your smaller Hex wrenches to help wiggle
the Slot-Nut in place.

Tools needed:

5/6MM 24MM
2
2 26 |