Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Sim-Lab Manuals
  4. Video Gaming Accessories
  5. PORSCHE P911 RSR STEERING WHEEL
  6. Instruction manual

Sim-Lab PORSCHE P911 RSR STEERING WHEEL Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
PORSCHE P911 RSR STEERING WHEEL
VERSION 1.0
Last updated: XX-XX-2022

Advertisement

loading
Need help?

Need help?

Do you have a question about the PORSCHE P911 RSR STEERING WHEEL and is the answer not in the manual?

Questions and answers

Related Manuals for Sim-Lab PORSCHE P911 RSR STEERING WHEEL

Summary of Contents for Sim-Lab PORSCHE P911 RSR STEERING WHEEL

  • Page 1 INSTRUCTION MANUAL PORSCHE P911 RSR STEERING WHEEL VERSION 1.0 Last updated: XX-XX-2022...

  • Page 2: Before You Start

    BEFORE YOU START: Thank you for your purchase. In this manual we will provide you with the means to get started using your new steering wheel! Porsche P911 RSR Steering Wheel Features: Full billet anodized aluminium construction 80 telemetry controllable RGB LEDs Motorsports grade electronics High resolution 5”...

  • Page 3: Installing Drivers

    Installing drivers Display drivers To make the display part of the steering wheel functional, specific drivers are needed. Drivers can be downloaded from the product page. Vocore drivers download: Installation To install the display drivers, run the downloaded package and specify the location where to install the drivers: Press ‘Next’.
  • Page 4 Specify the name of the start menu folder: Press ‘Next’. Review the settings before installation: Press ‘Install’. 4 20...
  • Page 5 The drivers will install now. Sometimes this can take longer than expected. This usually means a system restore point is being made and should not hinder installation. If it does, unplug the USB cable to the wheel in case it is connected and try again. Make sure you have administrator rights on your system.
  • Page 6 SimHub installation To control the LEDs on the wheel, Simhub can be used. Download the lastest version of Simhub from https://simhubdash.com Installation Unzip the downloaded file and run the setup file. To be able to continue, you will have to accept the License Agreement: Press ‘Next’.
  • Page 7 Specify the location where to install the software: Press ‘Next’. Make sure all options are checked: Press ‘Next’. 7 20...
  • Page 8 Press ‘Install’. After installation press ‘Finish’. 8 20...

  • Page 9: Initial Calibration

    Initial calibration Before using the wheel, we recommend to walk through calibration of all paddles found on the back of the wheel. To make this an easier and more visual experience, let’s open the Windows Game Controller program. The quickest way to do this is to press the windows-key, type ‘Game Controller’ and hit ‘enter’...
  • Page 10 Calibration Mode The calibration is a very straightforward process, but first we need to enter the Calibration Mode on the wheel itself. To activate the wheels’ calibration mode, Press and Hold the ADJUST (A) button and CALIBRATION MODE (CM) button at the same time.
  • Page 11 Clutch modes and bite-point adjustment To make the most out of the dual clutches installed, they need to be set-up to your liking and intended use. Mode selection We offer multiple modes for different uses. This can be changed on the fly on the wheel itself.
  • Page 12 Bite-point adjustment Bite-point adjustment is available only in the DUAL-CLUTCH mode. If you are not in this mode, please see the previous page how to switch to this mode. Also, it is important that both paddles are calibrated before adjusting their behavior. Please see Page 14 before following the steps on this page, if you have not calibrated your clutch paddles already.
  • Page 13 SimHub configuration If you haven’t connected the wheel with the supplied USB cable to your computer, this is required from this point forward. Activation To use the display with SimHub, it needs to be enabled: Press ‘Dash Studio’ (1). 13 20...
  • Page 14 Press ‘VOCORE’ (2). In the ‘Screen #1’ section, check ‘Enable display’ (3). The ‘Connected’ indicator will appear on its right-hand side. When the screen is connected, go back to ‘Dashboards’ (4). 14 20...
  • Page 15 Hover over the dashboard you want to display and press ‘Start’ (5). A popup will appear, select ‘On VOCORE screen’ (6). The display will now boot using the selected dash. NOTE: Importing or changing dash profiles is not part of this document. For more information on that topic, please see the SimHub documentation.
  • Page 16 Controlling the LEDs A sample LED profile can be downloaded from the product page. LED profile download: To enable or adjust LEDs, navigate back to the ‘VOCORE’ page in ‘Dash Studio’. You may also refer to Pages 14/15 of this document. Check the ‘GRID BY SIMLAB’...
  • Page 17 Press the import profile icon (3). Browse to the location where you stored the LED profile, select it and press ‘Open’. The load the profile, make sure it is selected (PORSCHE x GRID 911 RSR WHEEL) and press ‘Load’ (4). 17 20...
  • Page 18 Changing the LEDs’ functions. To change the LED effects you need to know their numbering to identify them on the wheel. The following schematic shows the LED numbering for the available inputs and RPM LEDs. The buttons and encoder knob LEDs consist of four very small but powerful LEDs.
  • Page 19 Only use the supplied DC power supply. When experiencing intermittent signal loss, we suggest using a powered USB hub. Only connect ‘Grid’ or ‘Grid by Sim-Lab wheels’ or risk DAMAGE to your wheel or PC! 19 20...

  • Page 20: Bill Of Materials

    Alternatively, we now have Discord servers where there are quite some experienced customers hanging out. They might just help you along if you ask them nicely ;) www.sim-lab.eu/discord / www.gridbysimlab.com/discord Product page on the Grid by Sim-Lab website: 20 20...