Checklist After Installation; Work - Panasonic S-15MF3E5AN Installation Instructions Manual

Hide thumbs Also See for S-15MF3E5AN:
Table of Contents

Advertisement

9. CHECKLIST AFTER INSTALLATION WORK
Work List
No.
Are the indoor units installed following the
Installation
1
content of Section "2. SELECTING THE
INSTALLATION SITE"?
In the case of multiple installation: Is there
2
a wrong tubing connection with another
system?
In the case of multiple installation: Is there
3
a wrong wiring connection with another
system?
Is the earth leakage circuit breaker
4
(all-pole switching function provided)
installed?
Is there any wrong installation of optional
5
parts or wrong wiring?
Tubing
&
6
Was the ground wire work performed?
Wiring
Are there any wrong power supply wiring,
7
wrong connection wire, wrong signal wire
or loose screw?
Is the thickness of wire in accordance
8
with rule?
Is the power-supply voltage equal to the
9
nameplate of the unit?
Was the check of the airtight test, flared
tube fitting and gas leakage on the
10
welded portion performed?
Has the adhesive been applied to the
11
drain connecting portion (resin portion) of
the indoor unit?
Drain
12 Is there water leakage?
Check
Indoor unit drain pipe has a downward
13
gradient (1/100 or more) by rule. Is the
drain water flowing smoothly?
Was the heat insulation work at a suitable
location including the flared tube fitting
Heat
14
Insulation
(refrigerant tube & drain pipe) performed
properly?
15 Did the abnormal sound occur?
Test Run
Did the cool and warm airflow discharge
16
from the indoor unit?
Content
Check
Possibility of Failure & Checkpoint
There is a possibility of light injure or loss of
property.
The unit is inoperated or the refrigerant flows
into the inoperative unit and the leakage is
expected. Check if there is a wrong tubing or wiring
connection with another system.
Power failure or short circuit may cause electric
shock or fire. Check installation work and ground
wire work.
If the gas leakage occurs, the unit quality not only
becomes inferior but affects environment. Repair it
as quickly as possible.
The resin portion cracks after a few months and it
may cause water drain.
Since there is a possibility of water drain, repair the
drain pipe if the drain failure or water drain occurs.
The quality of unit not only becomes inferior but
there is a possibility of the water drain. So, perform
the heat insulation work properly.
Check if there is a fan contact or distortion of the
indoor unit.
Check if the unit does not operate or there is a
wrong tubing or wiring connection with another
system.
40

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents