Defining Parameter Settings; Parameter Settings - Mo-vis Micro Joystick LiNX Installation Manual

Hide thumbs Also See for Micro Joystick LiNX:

Table of Contents

Defining parameter settings

Connect the device to a PC. Use a standard USB-C cable.

CAUTION:

protective cover. If the connections are not used, always put or

keep the protective covers in.

Configure the parameters with the software.

Upload the configuration.

Test the configuration and adjust if necessary.

Compensation settings

Road Compensation is a unique feature in the mo-vis joysticks. When you

are driving on an uneven road with a special control mounted in a tray, or

on an arm (or any other place where tremblements may be amplified), it

can be very difficult to maintain control over the electric wheelchair and

sometimes even unsafe. You can make this easier and safer, by enabling the

Road Compensation.

There is an accelerometer inside the joysticks and when it vibrates, it sends a

signal to the wheelchair to slow down to a predefined parameter.

Before inserting a jack or USB cable, remove the

Micro Joystick Installation manual

Table of Contents

Do you have a question about the Micro Joystick LiNX and is the answer not in the manual?