Mo-vis Micro Joystick LiNX Installation Manual page 17

Hide thumbs Also See for Micro Joystick LiNX:

Table of Contents

WARNING:

downwards. This is to prevent water from entering the Interface

unit.

Place a power on/off (pwr) and/or mode (in) switch, secure their cabling

and insert their connections. You can use the connections on the

Interface unit.

CAUTION:

cover. If the connections are not used, always put or keep the

protective covers in.

CAUTION:

accessories, including switches, must also comply with the MDR

2017/745 regulations (e.g. the mo-vis Twister, tested according to

EN12184 standards).

Connect the cabling to the wheelchair electronics.

CAUTION:

installation.

Place the Interface unit with the connectors facing

Before inserting a connector, remove the protective

This is Class I Medical Device (MDR 2017/745). All

All wheelchair electronics must be switched off during

Micro Joystick Installation manual

Table of Contents

Need help?

Do you have a question about the Micro Joystick LiNX and is the answer not in the manual?