Table of Contents
Advertisement
Radiation and anti-interference information
Notification for US users:
The device has passed the tests and complies with the limitations on Class B digital equipment in Part 15 of FCC standard. These
limitations can provide reasonable prevention on harmful interferences in household appliances. The device may produce, use and
radiate radio waves. If not installed and used per the instruction, it may produce harmful interference on the radio communication.
The device is tested to comply with Part 15C of FCC standard. The operations on the device must meet the following two conditions:
(1) The device will produce no harmful interference and
(2) it must be able to tolerate any interference, including those that may cause accidental operations.
Notifications for Canadian users:
The device complies with the radio noise limitations of Class B digital equipment specified for radio interference regulations of Industrial
Canada.
CAN ICES-003(B)/NMB-003(B)
The device complies with Industry Canada license-exempt RSS standard. The operations on the device must meet the following two
conditions:
(1) The device will produce no interference and
(2) it must be able to tolerate any interference, including those that may cause accidental operations.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage; et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Notification for European users:
Only the power cable and connecting cables attached to the device can be used. According to the requirements of the following
standards, if any attached power cable or connecting cables is changed, the electrical safety or radiation or anti-interference CE mark
certification may be compromised:
CE mark must be printed on the manufacturer label of an information technology equipment (ITE). The CE mark denotes that the device
has passed the tests and meets the following directives and standards: according to the requirements of EMC directive 2014/30/EU of
Class B specifications of European standard EN 55032B and the LVD directive 2014/35/EU specified by European standard EN 62368-1,
the device has passed the tests and meets the requirements of the CE mark.
User Manual<70 Series Monitor>
UM600633 Rev B
22
Advertisement
Table of Contents
