Download Print this page

Elo TouchSystems 2201 Quick Install Manual

Touchmonitor peripherals, webcam kit/ msr kit

Advertisement

Quick Links

Included Items
1 Webcam or MSR
2 M3 x 20mm mounting screws
1 Cable clip kit (1 clip and 1 screw)
Elo Technical Support
North America
Online self-help:
Elo Touchsystems
www.elotouch.com/go/websupport
301 Constitution Drive
Menlo Park, CA 94025
Technical Support contacts in your region:
www.elotouch.com
www.elotouch.com/go/contactsupport
DISCLAIMER:
Tyco Electronics Corporation and its Affiliates in the TE Touch Solutions business unit of the TE Connectivity Ltd. family of companies
(collectively "TE") reserves the right to change or update, without notice, any information contained herein; to change, without notice, the
design, construction, materials, processing or specifications of any products; and to discontinue or limit production or distribution of any
products.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise
without prior written permission of Tyco Electronics Corporation.
Elo (logo), Elo TouchSystems, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks of the TE Connectivity Ltd. family of
companies.
Copyright 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All rights reserved. [04/13/2011].
Europe
Asia-Pacific
Latin America
Tel +32 (0)16 35 21 00
Tel +81 (45) 478-2161
Tel 1-305-428-5210
Fax +32 (0)16 35 21 01
Fax +81 (45) 478-2180
Fax 1-305-717-4909
elosales@elotouch.com
www.tps.co.jp
www.elotouch.com.ar
Revision A
P/N E177619
Quick Install Guide
2201 Touchmonitor Peripherals
Webcam Kit
MSR Kit
www.elotouch.com

Advertisement

loading

Summary of Contents for Elo TouchSystems 2201

  • Page 1 Tyco Electronics Corporation. Elo (logo), Elo TouchSystems, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks of the TE Connectivity Ltd. family of companies.
  • Page 2 Installation Choose a location to install the Tilt the monitor back to access peripheral. the cable routing cover on the WEBCAM OR MSR front of the stand. Located the two mounting hole Remove the cable routing cover covers on the back of the monitor by pushing down on the snap for the chosen location.