Advertisement
Figure 4
1. Washer
2. Hairpin
3. Slot (frame)
5.
Slide the prop rod forward to remove it from the
bracket on the frame
Note:
Retain the hardware for cargo bed
installation.
6.
Lower the front of the bed.
7.
Remove the 4 flanged-head bolts (3/8 x 1 inch)
that secure the hinge brackets of the cargo bed
to the rear frame channel of the machine
5).
Note:
Retain the hardware for cargo bed
installation.
Figure 5
1. Rear frame channel
2. Flanged-head bolt (3/8 x
1 inch)
8.
Lift the latch lever on either side of the machine,
near the forward corner of the cargo bed
3).
4. Bed hole
5. Prop rod
(Figure
4).
(Figure
3. Hinge bracket
(Figure
9.
Lift the cargo bed up and off the machine
6).
g025013
g226636
4
Figure 6
(Figure
g226635
Advertisement
