Advertisement
For Machines with an Electric
Cargo Bed Lift
1.
Remove the hex-head bolt (1/2 x 5-1/2 inches)
and locknut (1/2 inch) from the inboard and
outboard lift brackets
Note:
Retain the hardware for cargo bed
installation.
2.
Remove the hairpin cotter from the clevis pin
(3-1/2 inches), and remove the clevis pin (3-1/2
inches) from the lift actuator rod
Note:
Retain the hardware for cargo bed
installation.
1. Locknut (1/2 inch)
2. Hex-head bolt (1/2 x 5-1/2
inches)
3. Hairpin cotter
3.
Remove the 4 flanged-head bolts (3/8 x 1 inch)
that secure the hinge brackets of the cargo bed
to the rear frame channel of the machine
5).
Note:
Retain the hardware for cargo bed
installation.
4.
Lift the cargo bed up and off the machine
6).
(Figure
7).
(Figure
Figure 7
4. Lift actuator rod
5. Clevis pin (3-1/2 inches)
7).
g226666
(Figure
(Figure
5
Advertisement
