Recharging The Battery From The Charging Port - GENERGY CRETA SILENT RC Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

6.4 Recharging the battery from the charging port

The CRETA SILENT SOL and CRETA SILENT RC models have a charging port
(CHARGER PORT) to recharge the battery of the generator. The CRETA SILENT
ATS model hasn´t it, because the battery of the generator is charged from an
external ATS box through the communication connector of 7 wires.
Connect the battery charger (included with the machine) to a 230V socket and to
the charging port (CHARGER PORT) on the control panel of the generator.
Charging can take around four hours.
NOTE: Do not use chargers or other plugs different of the original. If you need
to replace the charger, purchase an original from your GENERGY supplier.
If you do not have a 230V socket, you can start the generator manually and let it
run for a few hours. The battery also recharges from the engine.
After charging, if the battery still does not work, take it to a technical service for
inspection, it may be in poor condition and needs to be replaced.
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Creta silent solCreta silent ats

Table of Contents