Checks Before Use; Battery Connections; Assembly Of Wheels And Levelling Feet - GENERGY CRETA SILENT RC Instructions For Use Manual

4 Checks before use:

4.1 Battery connections

1. Before connecting the battery, check if the dial selector on the control panel
is in the "OFF" position.
2. Open the battery access door and connect the quick connectors as shown
in the image below.
NOTE: Make sure that the joint between them is well done.
4.2 Assembling of wheels and levelling feet.
Fix the wheel axles (4) with the screws (1) included. Next, insert the wheel (3) on
the axle, and fix it with the washer (2) and the screw (1).
Screw on the rubber feet (5) with the included screws (6).
NOTE: Do not use the generator without wheels and levelling feet. They are
designed to absorb vibrations of the equipment during the running, thus avoiding
damage due to tensions and jolts.
47