Oil Change; Air Filter Maintenance - GENERGY CRETA SILENT RC Instructions For Use Manual

9.1 Oil change

1. Keeps the engine running for 5 or 10 minutes, so that the oil can reach
some temperature and decrease its viscosity (more liquid). In this way, it
will be easier to extract it completely.
2. Under the oil drain hole, place a suitable container to collect the used oil,
according to image A.
3. Unscrew the oil drain screw by turning it counter clockwise. Save the screw
and its gasket.
4. Remove the cap with the oil level, so that the engine receives air and
expels the oil faster, according to image B.
5. Turn the engine by pulling the starter rope smoothly. Thus, the oil housed in
the moving parts of the engine can be extracted.
6. Once all the engine oil has been extracted, put back the drain screw with its
gasket. In case of spillages, clean.
7. Refill with the recommended oil according to images B and C. For more
information, review the chapter "
of this user manual.

9.2 Air filter maintenance

NOTE: The dirt in the air filter reduces the air flow in the carburettor, limiting
its combustion and promoting serious engine problems. Clean the air filter
regularly, according to the maintenance plan in this manual. In dusty areas, filter
cleaning should be more frequent.
NOTE: The generator should never run without the air filter, otherwise we will
have a quick engine wear.
Recharging the battery from the charging port
71
"