Carburettor Modification For High Altitude Running - GENERGY CRETA SILENT RC Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

Central display:
Parameters indicator.
During the running, the central display shows Voltage, Frequency and Hours of
work. You have only to press the "RESET" button to see each parameter.

6.3 Carburettor modification for high altitude running

At high altitude, the normal mixture of air and fuel in the carburettor will be too rich.
The performance is reduced and the fuel consumption is increased. A very rich
mixture also gets dirty the spark plug and makes it difficult to start the engine. If a
generator always operates at an altitude above 1500 meters, contact a Genergy
Authorized Service to modify the carburettor (this service is not covered by the
warranty, so it will be paid by the client).
Remember that even with a modification in the carburettor, the power will
decrease at a rate of 3.5% every 300m of altitude.
NOTE: If the carburettor is modified to operate at high altitude, the mixture of
air and fuel will be too poor to operate at low altitudes. The running of a modified
generator at low altitude can cause overheating and consequent engine damage.
Hence, it is necessary to change the carburettor to its original configuration.
62

Advertisement

Table of Contents
loading

This manual is also suitable for:

Creta silent solCreta silent ats

Table of Contents