Digital Control Panel - GENERGY CRETA SILENT RC Instructions For Use Manual

6.2 Digital control panel

Central pilot: Correct running
After the generator starts, it turns on and it means that the running is normal.
Left pilot: Generator overload
If the generator is overloaded, the indicator turns on. In this case, the generator
will keep running, but the power output will be cut off.
In case of overload, follow the steps below:
1. Disconnect the equipment from the generator.
2. Press the "RESET" button, according to the image above.
3. Connect other equipment which power consumption is less than the rated
power performed by the generator.
NOTE: A dirty air filter reduces the maximum power of the equipment,
activating the overload alarm even with lower power consumption than the nominal
power performed by the generator.
60