Hooker Furniture 1654-75906-MTL Assembly Instruction

Display cabinet

ALLEMBLY INSTRUCTION

(For connecting the wire of the light on this cabinet)

Item# 1654-75906-MTL Display Cabinet

*** Caution: Please read all instructions carefully before starting the assembly process.

Please note this cabinet can be used alone with can light on by a touch dimmer. Also, when

two or more are bunched together, you can control all can lights by touching one dimmer.

Diagram 2

Diagram 1

Assembly Steps:

1. When each piece of cabinet is used alone, attach male connector of the power switch (A) to a

wall plug. (See Diagram 1)

1/2

Table of Contents

Do you have a question about the 1654-75906-MTL and is the answer not in the manual?

Page 1 ALLEMBLY INSTRUCTION (For connecting the wire of the light on this cabinet) Item# 1654-75906-MTL Display Cabinet *** Caution: Please read all instructions carefully before starting the assembly process. Please note this cabinet can be used alone with can light on by a touch dimmer. Also, when two or more are bunched together, you can control all can lights by touching one dimmer.
Page 2 2. Touch dimmer is at the inside of right post. 3. If you want to bunch two or more cabinets together, place them all side by side in a desired location. 4. Leave male connector of the can light (C) and female connector of power switch (B) for the first cabinet (#1) as it is.