Tips And Tricks; Maintenance And Cleaning - Parkside PDFW 120 A2 Translation Of The Original Instructions

Application examples/selecting a suitable tool
Function
Milling
Polishing, rust removal
CAUTION! Exert only
slight pressure when
applying the tool to the
workpiece.
Cleaning
Grinding
Cutting
■ The maximum diameter of the assembled
grinding bodies, grinding cones, pencil grinders
with a thread insert may not exceed 55 mm.
The maximum diameter of sandpaper grinding
accessories may not exceed 80 mm.
NOTE
► The max. permissible length of a mandrel is
33 mm.
■ Store the accessories in the original box or store
the accessory components somewhere else to
protect them from damage.
■ Store the accessories somewhere dry and not in
the vicinity of aggressive media.

Tips and tricks

■ If you exert too much pressure, the fitted tool
can break and/or the workpiece could be
damaged. You will achieve optimum working
results by moving the tool over the workpiece at
a steady speed and while exerting light pres-
sure.
PDFW 120 A2
Accessories
Milling cutters
Brass brushes
Polishing felts /
Cleaning brushes
Pencil grinders
Cutting discs /
Use
Various jobs; e.g. creating
recesses, hollows, forms,
grooves or slits
Rust removal
Various metals and plastics,
especially precious metals such
as gold and silver
e.g. cleaning hard-to-access
plastic housings or the area
around a door lock
Grinding work on stone, wood,
fine work on hard materials such
as ceramics or alloyed steel
Working metal, plastic and
wood

Maintenance and cleaning

WARNING! RISK OF INJURY!
Always pull out the plug before
adjustment, maintenance or repairing
the appliance.
NOTE
► Replacement parts not listed (such as
switches) can be ordered via our service
hotline.
► Motor brushes should only be replaced by
qualified service personnel
The appliance is maintenance-free.
■ Always clean the appliance immediately after
finishing work. Use a dry cloth to clean the
housing. Under no circumstances should you
use fuel, detergents, solvents or abrasive
cleaners.
■ Ensure ventilation openings are always free.
■ Remove any adhering grinding dust with a
brush.
Protrusion
(min–max) mm
18–25
9–15
12–18
9–15
10
12–18
GB │ MT │ 75 ■