Appliance-Specific Safety Instructions; Before Use; Fitting The Tool Rests - Parkside PDFW 120 A2 Translation Of The Original Instructions

■ Use an extension cord for outdoor use! Use
only suitably certified and labelled extension
cords outdoors.
■ Remain alert at all times! Pay attention to what
you are doing. Proceed with caution when
working with the tool. Do not use the power tool
when distracted.
■ Check the power tool for any damage! Before
continuing to use the power tool, check all safety
devices and any slightly damaged parts to make
sure they function properly and as intended.
■ Check that all moving parts work properly
without jamming and whether parts are
damaged. All parts must be properly fitted and
meet all the conditions to ensure the proper
operation of the power tool. Damaged safety
devices and parts must be properly repaired or
replaced by a specialist workshop unless other-
wise indicated in the instructions.
■ Damaged switches must be replaced at an
authorised customer service centre.
■ Do not use any power tools that you cannot
switch on and off with the power switch.
CAUTION! The use of other tools and acces-
sories could lead to an increased risk of
personal injury for you.
■ Have your power tool repaired by a qualified
electrician! This power tool complies with all
relevant safety regulations. Repairs may only be
performed by a qualified electrician using orig-
inal spare parts; otherwise this could lead to
accidents for the user.
Appliance-specific safety instructions
WARNING!
► Do not use damaged or deformed discs or
brushes.
■ Use only grinding discs and brushes whose
imprinted speed rating is at least as high as that
on the type plate on the power tool.
■ Adjust the spark deflector occasionally to
compensate for wear on the disc. Ensure that
the distance between the spark deflector and
the disc is a small as possible and is never more
than 2 mm.
PDFW 120 A2
■ Always leave the tool attached to the spindle to
reduce the risk of contact with the rotating
spindle.
Residual risks!
Even if you operate this power tool properly, there
will still be residual risks. The following risks can
occur in the context of the design and construction
of this power tool:
a) Lung damage, if no suitable breathing protection
is worn.
b) Hearing damage, if no suitable hearing protec-
tion is worn.
c) Damage to health caused by vibrations if the
appliance is used for extended periods or is not
properly used and maintained.
WARNING!
► The power tool creates an electromagnetic field
during operation. This field can, in certain circum-
stances, impair active or passive medical implants.
To reduce the risk of fatal injuries, we recom-
mend that people with medical implants con-
sult their doctor and the manufacturer of the
medical implant before operating this machine.

Before use

NOTE
► Please note that you must always fit
-- the tool rests ,
-- the spark deflectors
-- and the eye shields
as required for the grinding
disc .
► Please note that you will require tools which
are not included in delivery for the assembly.

Fitting the tool rests

Fit the tool rests onto the device using the
supplied knurled screws
♦ Hold the relevant nut into the appropriate recess
with a finger.
♦ Now use the knurled screw
workpiece rest firmly onto the device. Ensure
that the spring washer and washer are properly
fitted (see fig. B).
,
or buffing
(See fig. B):
to attach the
GB │ MT │ 71 ■