Download Print this page

enphase IQ Energy Router+ Quick Install Manual page 5

Hide thumbs Also See for IQ Energy Router+:

Advertisement

SAFETY
Safety and Advisory Symbols
DANGER: This indicates a hazardous situation, which if not
avoided, will result in death or serious injury.
WARNING: This indicates a situation where failure to follow
instructions may be a safety hazard or cause equipment
malfunction. Use extreme caution and follow instructions
carefully.
NOTE: This indicates information particularly important for
optimal system operation. Follow instructions carefully.
Safety Instructions
DANGER: Risk of electric shock. Risk of fire. Do not attempt
to repair the IQ Energy Router, SG Ready Relay, and Energy
Meter. They contain no user-serviceable parts. Tampering
with or dismantling the IQ Energy Router, SG Ready Relay,
and Energy Meter will void the warranty. If the equipment
fails, contact Enphase Customer Support
com/contact/support)
ment.
DANGER: Risk of electric shock. Do not use IQ Energy Router,
SG Ready Relay, and Energy Meter in a manner not specified
by the manufacturer. Doing so may cause death or injury to
persons, or damage to equipment.
DANGER: Risk of electric shock. Risk of fire. Only qualified
personnel should troubleshoot, install, or add parts to the IQ
Energy Router.
DANGER: Risk of electric shock. All sources to equipment
being serviced must be disconnected external to the device.
In particular, the storage system may energize conductors,
so storage circuits must ALWAYS be isolated via circuit
breaker or disconnected before working on any portion of the
system.
DANGER: Risk of electric shock. Be aware that installation of
this equipment includes risk of electric shock. If you wire the
SG Ready Relay and Energy Meter at the sub-panel, always
de-energise the sub-panel before beginning.
DANGER: Risk of electric shock. Risk of fire. Only use electri-
cal system components approved for wet locations.
DANGER: Risk of electric shock. Risk of fire. Ensure that all
wiring is correct and that none of the wires are pinched or
damaged.
DANGER: Risk of electric shock. Risk of fire. Do not work
alone. Someone should be in the range of your voice or close
enough to come to your aid when you work with or near
electrical equipment. Remove rings, bracelets, necklaces,
watches etc. when working with batteries, photovoltaic mod-
ules, or other electrical equipment.
WARNING: Before installing or using the IQ Energy Router,
SG Ready Relay, and Energy Meter read all instructions and
cautionary markings in the technical description and on the
components.
NOTE: Using unapproved attachments or accessories could
result in damage or injury.
NOTE: Perform all electrical installations in accordance with
all national and local electrical codes.
Environmental Protection
ELECTRONIC DEVICE: DO NOT THROW AWAY. Waste electrical products
should not be disposed of with household waste. Proper disposal is re-
quired. Refer to your local codes for disposal requirements.
(https://enphase.
for assistance or replacement equip-
Compliance with EU Directives
This product complies with the following EU Directives and can be
used in the European Union without any restrictions.
Radio Equipment Directive (RED): 2014/53/EU
Restriction of Hazardous Substances (RoHS): 2011/65/EU
The full text of the EU declaration of conformity is available at the
following internet address:
https://link.enphase.com/en-us/hem-documentation
Manufacturer:
Centrica Hive Limited
Millstream
Maidenhead
Berkshire
SL4 5GD, UK
Importer:
Enphase Energy NL B.V.,
Het Zuiderkruis 65,5215MV, 's-HERTOGENBOSCH,
THE NETHERLANDS,
PH: +31 73 3035859

Advertisement

loading

This manual is also suitable for:

Hems-hp-01Hems-gw-01