Advertisement
What's in the box (Cont.)
The energy meter, TQ EM420 Energy Manager, communicates wirelessly
to the IQ Energy Router and measures the energy consumption of the heat
pump. For more detailed specifications, click
following QR code:
The SG Ready Relay, the Gude Expert Net Control 2302, communicates
wirelessly to the IQ Energy Router and is needed to control the heat pump
through the SG Ready signal. The signal is sent through two dry contact
relays providing the ability to configure four different signal states.
For more detailed specifications, click
QR code:
Energy Meter
or scan the
SG Ready Relay
or scan the following
IQ Energy Router Specifications
Enviromental specification, standards, and certification
Temperature range
10°C to 40°C
Directive
RoHS, WEEE, REACH
Flammability
UL94
EMC
EN 55032: 2015
Electrical safety
EN IEC 62368-1:2020+A11: 2020
Compliance
CE
Max. radiated power
<10 dBm
Frequency
2405 – 2480 MHz
Electrical specification
Input voltage
5 VDC
Input current
1 A
Consumption
5 W
Mechanical specification
Weight
114 g
Height
27.3 mm
Width
96.1 mm
Length
96.6 mm
DC power cable
USB A to 5 V DC jack cable (2.5 mm x 5.5 mm barrel
connector)
EU power supply - Voltage
100 V– 240 V@ 50 Hz – 60 Hz
EU power supply - Current
0.2 A
Ethernet port
RJ-45
Colour
White
Packaging specification
Weight
270 g
Height
72 mm
Width
115 mm
Length
117 mm
Included in box
EU power supply, USB A to jack cable (2.5 mm x 5.5 mm
DC plug), CAT 6 Ethernet cable with RJ45 jack at either
end), TQ EM420 Energy Meter, and SG Ready Relay
Setting up the IQ Energy Router
1
A ) Location: Set up the IQ Energy Router close to the internet router or
an Ethernet switch connected to the internet router.
B ) Network connectivity: Plug one end of the CAT 6 Ethernet cable to
the IQ Energy Router and the other end into the Ethernet port of your
internet router or Ethernet switch.
C ) Powering the IQ Energy Router: Connect the IQ Energy Router to an
electrical outlet using the provided DC power cable.
Advertisement
