Audio - Axis P3715-PLVE User Manual

AXIS P3715-PLVE Network Camera
Configure your device
1. Go to System > Detectors > Camera tampering.
2. Set a value for Trigger delay. The value indicates the time that must pass before an email is sent.
3. Turn on Trigger on dark images to detect if the lens is sprayed, covered, or rendered severely out of focus.
Add an email recipient:
4. Go to System > Events > Recipients and add a recipient.
5. Type a name for the recipient.
6. Select Email.
7. Type an email address to send the email to.
8. The camera doesn't have it's own email server, so it has to log into another email server to send mails. Fill in the rest of the
information according to your email provider.
9. To send a test email, click Test.
10. Click Save.
Create a rule:
11. Go to System > Events > Rules and add a rule.
12. Type a name for the rule.
13. In the list of conditions, under Video, select Tampering.
14. In the list of actions, under Notifications, select Send notification to email and then select the recipient from the list.
15. Type a subject and a message for the email.
16. Click Save.

Audio

Add audio capability to your product
With the AXIS T61 Audio and I/O Interface products, you can add audio capability to your product. Use the setup in, for example,
interview rooms. You can place the Axis network video product on the wall or ceiling to give good visual coverage, and the
AXIS T61 Audio and I/O Interface on or above the interview table.
13