Table of Contents
Advertisement
AXIS P3715-PLVE Network Camera
Configure your device
Reduce bandwidth and storage
Important
Reducing the bandwidth can lead to loss of detail in the image.
1. Go to Video > Stream.
2. Click
3. Select Video format H.264.
4. Go to Video > Stream > General and increase Compression.
5. Go to Video > Stream > Zipstream and do one or more of the following:
-
Select the Zipstream Strength that you want to use.
-
Turn on Optimize for storage. This can only be used if the VMS supports B-frames.
-
Turn on Dynamic FPS.
-
Turn on Dynamic GOP and set a high Upper limit GOP length value.
Set up network storage
To store recordings on the network, you need to set up your network storage.
1. Go to System > Storage.
2. Click
3. Type the IP address of the host server.
4. Type the name of the shared location on the host server under Network share.
5. Type the username and password.
6. Select the SMB version or leave it on Auto.
7. Select Add share even if connection fails if you experience temporary connection issues, or if the share is not yet
configured.
8. Click Add.
Record and watch video
Record video directly from the camera
1. Go to Video > Image.
2. To start a recording, click
If you haven't set up any storage, click
network storage on page 11
3. To stop recording, click
Watch video
in the live view.
Add network storage under Network storage.
.
again.
and
. For instructions on how to set up network storage, see Set up
11
Advertisement
Table of Contents
