Axis P3719-PLE User Manual
  1. Manuals
  2. Brands
  3. Axis Manuals
  4. Security Camera
  5. P3719-PLE
  6. User manual

Axis P3719-PLE User Manual

Hide thumbs Also See for P3719-PLE:
Table of Contents

Advertisement

Quick Links

AXIS P3719-PLE Network Camera
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Axis P3719-PLE

Summary of Contents for Axis P3719-PLE

  • Page 1 AXIS P3719-PLE Network Camera User Manual...

  • Page 2: Table Of Contents

    AXIS P3719-PLE Network Camera Table of Contents Get started ..........

  • Page 3: Get Started

    Get started Find the device on the network To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support.

  • Page 4: Webpage Overview

    Secure passwords Important Axis devices send the initially set password in clear text over the network. To protect your device after the first login, set up a secure and encrypted HTTPS connection and then change the password. The device password is the primary protection for your data and services. Axis devices do not impose a password policy as they may be used in various types of installations.

  • Page 5: Installation

    AXIS P3719-PLE Network Camera Installation Installation To watch this video, go to the web version of this document. www.axis.com/products/online-manual/43882#t10170580 Installation video for the product.

  • Page 6: Configure Your Device

    AXIS P3719-PLE Network Camera Configure your device Configure your device Adjust the image This section includes instructions about configuring your device. If you want to learn more about how certain features work, go to Learn more on page 36. Optimize IR illumination Depending on the installation environment and the conditions around the camera, for example external light sources in the scene, you can sometimes improve the IR illumination if you manually adjust the intensity of the LEDs.
  • Page 7 2. Turn on WDR. 3. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest. Find out more about WDR and how to use it at axis.com/web-articles/wdr. Monitor long and narrow areas...
  • Page 8 AXIS P3719-PLE Network Camera Configure your device 1. Depending on your device, turn the camera or the 3-axis lens in the camera 90° or 270°. Note Make sure to aim IR LEDs away from walls or weathershields. 2. If the device doesn’t have automatic rotation of the view, go to Video > Installation.

  • Page 9: View And Record Video

    AXIS P3719-PLE Network Camera Configure your device View and record video This section includes instructions about configuring your device. To learn more about how streaming and storage works, go to Streaming and storage on page 36. Reduce bandwidth and storage Important Reducing the bandwidth can result in loss of details in the image.

  • Page 10: Set Up Rules For Events

    AXIS P3719-PLE Network Camera Configure your device Watch video 1. Go to Recordings. 2. Click for your recording in the list. Set up rules for events You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
  • Page 11 AXIS P3719-PLE Network Camera Configure your device 1. Click and select Legacy device interface. 2. Go to System > Detectors > Camera tampering. 3. Set a duration for Trigger after. The value indicates the time that must pass before an email is sent.
  • Page 12 AXIS P3719-PLE Network Camera Configure your device 1. Go to System > Events and add a rule. 2. Type a name for the rule. 3. In the list of actions, under Overlay text, select Use overlay text. 4. Select a video channel.

  • Page 13: The Device Interface

    AXIS P3719-PLE Network Camera The device interface The device interface Note Support for the features and settings described in this section varies between devices. Show or hide the main menu. Access the product help. Change the language. Set light theme or dark theme.
  • Page 14 AXIS P3719-PLE Network Camera The device interface Click to show I/O output ports. Use the switch to open or close the circuit of a port, for example to test external devices. Click to manually turn on or turn off the IR illumination.
  • Page 15 AXIS P3719-PLE Network Camera The device interface Rotate: Select the preferred image orientation. Zoom: Use the slider to adjust the zoom level. Autofocus area: Click to show the autofocus area. This area should include the area of interest. Autofocus: Click to make the camera focus on the selected area. If you don’t select an autofocus area, the camera focuses on the entire scene.
  • Page 16 AXIS P3719-PLE Network Camera The device interface Wide dynamic range WDR: Turn on to make both bright and dark areas of the image visible. Local contrast: Use the slider to adjust the contrast of the image. A higher value makes the contrast higher between dark and light areas.
  • Page 17 • Move the slider towards Dark to increase the threshold for the IR-cut filter. The camera changes to night mode later. IR light If your device doesn’t have built-in illumination, these controls are only available when you have connected a supporting Axis accessory.
  • Page 18 AXIS P3719-PLE Network Camera The device interface Note The exposure zones are related to the original image (un-rotated), and the names of the zones apply to the original image. This means, for example, that if the video stream is rotated 90°, then the Upper zone becomes the Right zone in the stream, and Left becomes Lower.
  • Page 19 Zipstream: A bitrate reduction technology, optimized for video surveillance, that reduces the average bitrate in an H.264 or H.265 stream in real time. Axis Zipstream applies a high bitrate in scenes where there are multiple regions of interest, for example in scenes with moving objects.
  • Page 20 AXIS P3719-PLE Network Camera The device interface Maximum bitrate: Turn on to set a bitrate limit. Bitrate limit: Enter a bitrate limit that is higher than the target bitrate. • Maximum: Select to set a maximum instant bitrate of the stream based on your network bandwidth.

  • Page 21: Recordings

    • Activate license with a key: If the app requires a license, you need to activate it. Use this option if your device doesn’t have internet access. If you don’t have a license key, go to axis.com/applications. You need a license code and the Axis product serial number to generate a license key.

  • Page 22: System

    AXIS P3719-PLE Network Camera The device interface System Date and time The time format depends on the web browser’s language settings. Note We recommend you to synchronize the device’s date and time with an NTP server. Synchronization: Select an option for synchronizing the device’s date and time.
  • Page 23 One-click cloud connection One-click cloud connection (O3C) together with an O3C service provides easy and secure internet access to live and recorded video from any location. For more information, see axis.com/end-to-end-solutions/hosted-services. Allow O3C: • One-click: The default setting. Press and hold the control button on the device to connect to an O3C service over the internet.
  • Page 24 Authentication failed: Sends a trap message when an authentication attempt fails. Note All Axis Video MIB traps are enabled when you turn on SNMP v1 and v2c traps. For more information, see AXIS OS Portal > SNMP. • v3: SNMP v3 is a more secure version, which provides encryption and secure passwords. To use SNMP v3, we recommend you to activate HTTPS, as the password is then sent through HTTPS.
  • Page 25 When configured without a CA certificate, server certificate validation is disabled and the device tries to authenticate itself regardless of what network it is connected to. When using a certificate, in Axis' implementation, the device and the authentication server authenticate themselves with digital certificates using EAP-TLS (Extensible Authentication Protocol - Transport Layer Security).
  • Page 26 To install test firmware or other custom firmware from Axis on the device, you need a custom-signed firmware certificate. The certificate verifies that the firmware is approved by both the device owner and Axis. The firmware can only run on a specific device which is identified by its unique serial number and chip ID.
  • Page 27 AXIS P3719-PLE Network Camera The device interface A rule defines the conditions that must be met for the product to perform an action. The list shows all the currently configured rules in the product. Note You can create up to 256 action rules.
  • Page 28 AXIS P3719-PLE Network Camera The device interface Use passive FTP: Under normal circumstances the product simply requests the target FTP server to open the data connection. The device actively initiates both the FTP control and data connections to the target server.
  • Page 29 IoT integration and is used in a wide variety of industries to connect remote devices with a small code footprint and minimal network bandwidth. The MQTT client in Axis device firmware can simplify integration of data and events produced in the device to systems which are not video management systems (VMS).
  • Page 30 AXIS P3719-PLE Network Camera The device interface Password: Enter a password for the username. Client ID: Enter a client ID. The client identifier is sent to the server when the client connects to it. Clean session: Controls the behavior at connection and disconnection time. When selected, the state information is discarded at connect and disconnect.
  • Page 31 DNS. Windows SMB/CIFS names are not supported. • Network share: Enter the name of the shared location on the host server. Several Axis devices can use the same network share, since each device gets its own folder.
  • Page 32 AXIS P3719-PLE Network Camera The device interface Important Risk of data loss and corrupted recordings. Do not remove the SD card while the device is running. Unmount the SD card before you remove it. Unmount: Click to safely remove the SD card.
  • Page 33 Delete user: Delete the user. You can’t delete the root user. By creating an ONVIF user, you automatically enable ONVIF communication. Use the username and password for all ONVIF communication with the device. For more information see the Axis Developer Community at axis.com. ONVIF media profiles An ONVIF media profile consists of a set of configurations that you can use to change media stream settings.
  • Page 34 Severity: Select which messages to send when triggered. CA certificate set: See the current settings or add a certificate. Plain config Plain config is for advanced users with experience of Axis device configuration. Most parameters can be set and edited from this page.

  • Page 35: Maintenance

    Note All Axis device firmware is digitally signed to ensure that you only install verified firmware on your device. This further increases the overall minimum cybersecurity level of Axis devices. For more information, see the white paper “Signed firmware, secure boot, and security of private keys” at axis.com.

  • Page 36: Remote Focus And Zoom

    H.264 or MPEG-4 Part 10/AVC Note H.264 is a licensed technology. The Axis product includes one H.264 viewing client license. To install additional unlicensed copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller. H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared to the Motion JPEG format and by as much as 50% compared to older MPEG formats.
  • Page 37 AXIS P3719-PLE Network Camera Learn more How do Image, Stream, and Stream profile settings relate to each other? The Image tab contains camera settings that affect all video streams from the product. If you change something in this tab, it immediately affects all video streams and recordings.

  • Page 38: Applications

    Actual average bitrate Applications AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications.
  • Page 39 AXIS P3719-PLE Network Camera Learn more Note • Several applications can run at the same time but some applications might not be compatible with each other. Certain combinations of applications might require too much processing power or memory resources when run in parallel. Verify that the applications work together before deployment.

  • Page 40: Specifications

    AXIS P3719-PLE Network Camera Specifications Specifications Product overview Mounting bracket Camera unit Dome cover IR illumination Network connector (PoE) SD card slots Control button Status LED indicator Restart button LED indicators Status LED Indication Unlit Connection and normal operation. Green Shows steady green for 10 seconds for normal operation after startup completed.

  • Page 41: Sd Card Slot

    This product supports SD/SDHC/SDXC cards. For SD card recommendations, see axis.com. SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

  • Page 42: Troubleshooting

    When you upgrade the device with the latest firmware in the active track, the product receives the latest functionality available. Always read the upgrade instructions and release notes available with each new release before you upgrade the firmware. To find the latest firmware and the release notes, go to axis.com/support/firmware.

  • Page 43: Technical Issues, Clues, And Solutions

    3. Go to Maintenance > Firmware upgrade and click Upgrade. Follow the instructions on the page. When the upgrade has finished, the product restarts automatically. You can use AXIS Device Manager to upgrade multiple devices at the same time. Find out more at axis.com/products/axis-device-manager.

  • Page 44: Performance Considerations

    To access the device externally, we recommend you to use one of the following applications for Windows • AXIS Companion: free of charge, ideal for small systems with basic surveillance needs. • AXIS Camera Station: 30-day trial version free of charge, ideal for small to mid-size systems. For instructions and download, go to axis.com/vms.
  • Page 45 User Manual Ver. M3.2 AXIS P3719-PLE Network Camera Date: January 2022 © Axis Communications AB, 2021 - 2022 Part No. T10168322...

Table of Contents