Axis P3727-PLE Repainting Instructions
Hide thumbs
Also See for P3727-PLE:
- User manual (48 pages) ,
- User manual (27 pages) ,
- Installation manual (30 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Axis P3727-PLE
Summary of Contents for Axis P3727-PLE
- Page 1 AXIS P3727-PLE Network Camera Repainting Instructions...
-
Page 2: Impact On Warranty
Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment. - Page 3 Clean the parts properly to remove oil, grease and dust. For more information on the materials used in the product, see its datasheet at axis.com. Powder coated parts - Use a primer. Alternatively, remove the original powder coating down to the base material, using fine sandpaper, and clean the parts before painting.
- Page 4 AXIS P3727-PLE Network Camera Repaint the product 3. Remove the dome and the plastic holder from the dome cover. Repainting 1. Make sure all necessary preparations of the dome cover have been made. See Preparations on page 3 . 2. Apply a thin and even layer of spray paint according to the instructions of the paint manufacturer.
- Page 5 AXIS P3727-PLE Network Camera Repaint the product Reassembly 1. Put the plastic holder back in it’s place inside the dome cover. 2. Line up the dome to the dome cover as shown in the image and snap the two parts together (4 snaps).
- Page 6 AXIS P3727-PLE Network Camera Repaint the product TR20 3. Reassemble the dome cover and the camera unit and tighten the screws (torque 1.0 Nm, 0.7 lb ft).
- Page 7 Repainting Instructions Ver. M1.4 AXIS P3727-PLE Network Camera Date: June 2021 © Axis Communications AB, 2021 Part No. T10168338...