Table of Contents
Advertisement
AXIS P3715-PLVE Network Camera
The web interface
Light environment:
• Automatic: Automatic identification and compensation for the light source color. This is the recommended setting
which can be used in most situations.
• Automatic – outdoors
recommended setting which can be used in most outdoor situations.
• Custom – indoors
and good for a normal color temperature around 2800 K.
• Custom – outdoors
5500 K.
• Fixed – fluorescent 1: Fixed color adjustment for fluorescent lighting with a color temperature around 4000 K.
• Fixed – fluorescent 2: Fixed color adjustment for fluorescent lighting with a color temperature around 3000 K.
• Fixed – indoors: Fixed color adjustment for a room with some artificial light other than fluorescent lighting and
good for a normal color temperature around 2800 K.
• Fixed – outdoors 1: Fixed color adjustment for sunny weather conditions with a color temperature around 5500 K.
• Fixed – outdoors 2: Fixed color adjustment for cloudy weather condition with a color temperature around 6500 K.
• Street light – mercury
in street lighting.
• Street light – sodium
lights common in street lighting.
• Hold current: Keep the current settings and do not compensate for light changes.
• Manual
the camera to interpret as white in the live view image. Use the Red balance and Blue balance sliders to adjust the
white balance manually.
Day-night mode
IR-cut filter:
• Auto: Select to automatically turn on and off the IR-cut filter. When the camera is in day mode, the IR-cut filter
is turned on and blocks incoming infrared light, and when in night mode, the IR-cut filter is turned off and the
camera's light sensitivity increases.
• On: Select to turn on the IR-cut filter. The image is in color, but with reduced light sensitivity.
• Off: Select to turn off the IR-cut filter. The image is in black and white for increased light sensitivity.
Threshold: Use the slider to adjust the light threshold where the camera changes from day mode to night mode.
• Move the slider towards Bright to decrease the threshold for the IR-cut filter. The camera changes to night mode
earlier.
• Move the slider towards Dark to increase the threshold for the IR-cut filter. The camera changes to night mode later.
IR light
If your device doesn't have built-in illumination, these controls are only available when you connect a supporting Axis accessory.
Allow illumination: Turn on to let the camera use the built-in light in night mode.
Synchronize illumination: Turn on to automatically synchronize the illumination with the surrounding light. The synchronization
between day and night only works if the IR-cut filter is set to Auto or Off.
Automatic illumination angle
: Automatic identification and compensation for the light source color. This is the
: Fixed color adjustment for a room with some artificial light other than fluorescent lighting
: Fixed color adjustment for sunny weather conditions with a color temperature around
: Fixed color adjustment for ultraviolet emission in mercury vapor lights common
: Fixed color adjustment that compensates for the yellow orange color of sodium vapor
: Fix the white balance with the help of a white object. Drag the circle to an object that you want
: Turn on to use the automatic illumination angle.
20
Advertisement
Table of Contents
