HP ProDesk 600 G2 Hardware Reference Manual page 35

Sff business pc
Hide thumbs Also See for ProDesk 600 G2:
Table of Contents

Advertisement

8.
Disconnect the power cable (1) and data cable (2) from the rear of the hard drive. Press the release latch
on the side of the drive cage (3), and then slide the drive out of the drive bay (4).
9.
If you are installing a new drive, refer to
are not installing a new drive, rotate the drive cage down and replace the access panel.
Installing a secondary 3.5-inch hard drive on page
30. If you
Installing and removing drives
29

Advertisement

Table of Contents
loading

Table of Contents