Mounting And Dismounting - Pepperl+Fuchs ARS B2 IA Series Hardware Manual

ARS*-B2-IA*
Installation
3.2

Mounting and Dismounting

Mounting or Dismounting Rail Field Switches
Mounting DIN mounting rail
The rail field switches are designed for mounting on a 35 mm DIN mounting rail in accordance
with EN 50022.
1
Figure 3.1
1.
Position the rail field switch on the DIN mounting rail.
2.
Use the bottom hook in order to hook the electronics onto the DIN mounting rail.
3.
Move the top hook over the upper end of the DIN mounting rail until the locking mechanism
engages.
16
3
2