Table of Contents
Advertisement
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Run the battery down completely, then remove it
from the tool.
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
u
to any authorised repair agent or a local recycling station.
(Original instructions)
Technical data
Voltage
V
DC
No-load speed
Min
Max. torque
Nm
(PTI Rating)
Chuck capacity
mm
Max Drilling capacity
Steel/wood
mm
Weight
kg
Battery type
Ah
Battery capacity
Charger
Input Voltage
Output Voltage
Current
Approx. charge time
Level of sound pressure according to EN 60745:
Sound pressure (L
) 63.2 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 74.2 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
2
Drilling into metal (a
) < 2.5 m/s
h, D
Screwdriving without impact (a
) < 2.5 m/s
h, s
ENGLISH
EPL7I (H1)
7
-1
550
10
10
8/16
0.9
Li-Ion
1.1
90608113 Type 1
V
220-240
AC
V
10
DC
mA
120
7
h
2
, uncertainty (K) 1.5 m/s
2
2
, uncertainty (K) 1.5 m/s
7
Advertisement
Table of Contents
