Care And Maintenance; Instructions For Assembly - Kettler TRACK EXPERIENCE Manual

Assembly Instructions
GB
If the equipment is in regular use, check all its components
■
thoroughly at appropriate intervals. Pay particular attention to
the tightness of bolts and nuts.
In case of a regular use of the running belt, the cold running belt
■
has to be serviced with silicone oil.
Observe the movement of the edge of the belt when it is in use.
■
If it tends to run towards the side, readjust it accordingly.
Depending on the degree of use and load to which the unit is
■
subjected, the belt may tend to stretch or slip. Tighten the belt

Care and Maintenance

Use for your regular cleaning, maintenance and care our ap-
■
pliance maintenance set (Article no. 07921-000) specifically li-
censed for KETTLER Sports apparatus and available from the
Sport specialized trade.
The electrical elements and components do not require special
■
maintenance. No alterations or repairs (except mantainance
checks) should be made to these parts unless by a qualified el-
ectrician.
Please keep original packaging of this article, so that it may be
■
used for transport at a later date, if necessary. Goods may only
be returned after prior arrangement and in (internal) packa-
ging, which is safe for transportation, in the original box if pos-
sible. It is important to provide a detailed defect description /
damage report!

Instructions for Assembly

WARNING!
Ensure that your working area is free of possi-
!
ble sources of danger, for example don't leave any tools ly-
ing around. Always dispose packaging material in such a
way that it may not cause any danger. There is always a risk
of suffocation if children play with plastic bags!
Ensure that you have received all the parts required (see check
■
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
Before assembling the equipment, study the drawings carefully
■
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
Please note that there is always a danger of injury when wor-
■
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
The equipment must be assembled with due care by an adult
■
GB KETTLER GB Ltd.
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
+44 1527 591901
www.kettler.co.uk
+44 1527 62423
Mail: sales@kettler.co.uk
as described. Adjust the tightness of the belt as described in sec-
tion „Adjusting the belt" on page 30.
Running Tip: Running straight on the treadmill is made easier by
focussing on a fixed object in front of you in the room. Run as
if you wanted to approach the object.
Importantly: Please keep the safety key in a safe place and ensu-
re that it is kept out of reach of children!
When ordering spare parts, always state the full item number,
■
spare-partnumber, the quantity required and the S/N of the
product (see handling).
Example order: item no. 07885-600 / spare-part no. 68006220
/ 2 pieces / S/N
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
Waste Disposal
KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
The fastening material required for each assembly step is sho-
■
wn in the diagram inset. Use the fastening material exactly as
instructed.
Bolt all the parts together loosely at first, and check that they
■
have been assembled correctly. Tighten the locknuts by hand un-
til resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all
screw connections have been tightened firmly. Attention: once
locknuts have been unscrewed they no longer function correctly
(the locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out prelimi-
■
nary assembly work (e.g. addition of tubing plugs).
USA KETTLER International Inc.
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+1 888 253 8853
+1 888 222 9333
5