dji MATRICE 30 Dock Bundle Series Maintenance Manual page 11

2. Make sure that the dock cover rubber seal strip is in good condition and is securely attached
to the dock cover.
3. Make sure that the dock cover propeller bumpers are not damaged or deformed, and the
screws are securely mounted.
Dock Cover
Propeller Bumpers
4. Make sure the dock cover drag chains are not broken, the drag chain covers are firmly
secured and the cables are not exposed.
5. Make sure the tension springs are not broken.
6. Moisten a soft cloth with clean water or neutral cleaner and clean the dock cover surface,
the propeller bumpers, and the drag chains.
• If any of the mentioned parts are broken or damaged, contact a DJI authorized service
provider to replace them.
• The dock cover propeller bumpers and the tension springs are wearing parts. Contact a
DJI authorized service provider and replace them in time when necessary.
DJI Matrice 30 Series Dock Bundle Maintenance Manual
Dock Cover Rubber
Seal Strip
Dock Cover Drag Chain
Tension Spring
©
2023 DJI All Rights Reserved 11