Midea ST 3.6F wi Instruction Manual page 91

Filling The Rinse Aid Reservoir
1
Remove the rinse aid reservoir cap
by rotating it counterclockwise.
3
Close the rinse aid reservoir cap by
rotating it clockwise.
Adjusting the rinse aid reservoir
Remove the rinse aid reservoir cap. Turn the rinse aid indicator
dial to a number. The higher the number, the more rinse aid the
dishwasher uses.
If the dishes are not drying properly or are spotted, adjust the
dial to the next higher number until your dishes are spot-free.
Reduce it if there are sticky whitish stains on your dishes or a
bluish film on glassware or knife blades.
2
Carefully pour in the rinse aid into
the dispenser, whilst avoiding it to
overflow.
NOTE
Clean up any spilled rinse aid with
an absorbent cloth to avoid
excessive foaming during the next
wash.
DE
E