Cleaning And Maintenance - Foster Prep Station PS1000HR User Manual

4

Cleaning and Maintenance

IMPORTANT: This appliance is heavy. When moving the appliance care should be
taken and correct safe practices followed. Prior to cleaning ensure that the correct
PPE is available and utilised and that the appliance is switched off and disconnected
from the power supply. Do not disconnect or connect the appliance from the power
supply with wet hands. Following cleaning, only when the appliance is dry should the
appliance be reconnected to the power supply and switched on.
Cleaning should be carried out periodically as required depending on application.
Switch off the appliance, disconnect from the power supply and remove all products, racking and shelves.
Care should be taken with the racking and shelves being inspected for any signs of damage resulting in sharp
edges and ensure that body parts do not come into contact with cold surfaces.
When cleaning a freezer it is recommended that the internal temperature is allowed to increase to above
freezing prior to cleaning.
Wash all internal and external surfaces with a mild liquid detergent
diluted as per the manufacturer's instructions. Rinse surfaces with clean
water and dry thoroughly.
Never use wire wool, other abrasive substances, cleaning agents with a high
acid or alkaline content (e.g. bleach acid or chlorine) or similar products as
they can damage the appliance.
When the appliance has been cleaned and dried, refit the racking and
shelves.
Re-connect the appliance to the power supply adhering to the previous
guidelines above. Switch the appliance on and allow it to reach it's normal
operating temperature before re-loading product.
PS1000 & PS1400 User Manual
Maintenance
13