Securing the appliance in the
niche
^ Press the appliance up against the
furniture wall and then secure the
appliance with screws m through
fixing bracket c.
^ Screw fixing bracket j securely to
the housing unit floor using screw n.
^ Secure the appliance by fitting screw
o into bearing block h.
Tighten all the screws.
Building in the appliance
^ If necessary, align the cover strip by
pushing it parallel to the top of the
unit - it should be set slightly back
and must not protrude.
^ Snap off the protruding end p on
fixing bracket c. It is no longer
required.
^ Refit cover b.
^ Push the plastic tab into the left-hand
aperture in cover q and then fit the
cover in position.
^ Flip down the cover on fixing bracket
j.
61