Securing the appliance in the
niche
1. Secured at the top
2. Secured at the side
Screw the appliance into position on
the right and the left.
Installing the appliance
Fitting the furniture door
Ensure that the plinth facing is refit-
ted correctly.
A gap of 8 mm must be set between
the appliance door and the fixing
bracket.
Push fitting aids up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the fur-
niture door being fitted (see on the
diagram).
Undo nuts and take fixing
bracket off together with the fitting
aids .
65