Securing The Appliance In The Niche; Fitting The Furniture Door - Miele K 31222 Ui Operating And Installation Instructions

Securing the appliance in the
niche
1. Secured at the top
2. Secured at the side
 Screw the appliance into position on
the right and the left.
Installing the appliance

Fitting the furniture door

If fitted in a run of units make sure that
the top edge of the furniture door is at
the same height as neighbouring unit
doors.
The furniture door must be fitted
correctly and not under tension.
The next section gives instructions on
how to fit a furniture door that is at
least 16–19 mm thick.
Ensure that the plinth facing is refitted
correctly.
 The distance between the appliance
door and the fixing bracket is set to
8 mm at the factory. Check this
distance and adjust it if necessary.
 Push the fitting aids  up to the
height of the furniture door: the lower
edge X of the fitting aids must be at
the same height as the upper edge of
the furniture door being fitted (see 
in diagram).
59