Securing The Appliance In The Niche; Fitting The Furniture Door - Miele K 31222 Ui Operating And Installation Instructions

Installation

Securing the appliance in the niche

1. Secured at the top
2. Secured at the side
 Screw the appliance into position on
the right and the left.
68

Fitting the furniture door

If fitted in a run of units make sure that
the top edge of the furniture door is at
the same height as neighbouring unit
doors.
The furniture door must be fitted cor-
rectly and not under tension.
The next section gives instructions on
how to fit a furniture door that is at
least 16–19 mm thick.
Ensure that the plinth facing is refitted
correctly.
 The distance between the appliance
door and the fixing bracket is set to
8 mm at the factory. Check this dis-
tance and adjust it if necessary.
 Push the fitting aids  up to the
height of the furniture door: the lower
edge X of the fitting aids must be at
the same height as the upper edge of
the furniture door being fitted (see 
in diagram).