Multi-Function Display; Description; Setting The Timer - Yamaha WR250F 2023 Owner's Manual

EAM20150

MULTI-FUNCTION DISPLAY

EWA19000
WARNING
Be sure to stop the machine before making
any setting changes to the multi-function
display.
The multi-function display is equipped with the
following:
• Speedometer
• Clock
• Two tripmeters (which show the distance that
has been traveled since it was last set to zero)
• Accumulated fuel consumption meter
• Timer (which shows the time that has been ac-
cumulated since the start of timer measure-
ment)
EAM30326

DESCRIPTION

Operation buttons:
1. A button
2. B button
Screen display:
3. Tripmeter indicator " "
4. Tripmeter indicator " "
5. Timer indicator " "
6. Odometer indicator "
7. Accumulated fuel consumption meter indi-
cator " ", "
8. Odometer/Tripmeter/Clock/Timer/Accumu-
lated fuel consumption meter
9. Speedometer
TIP
• The operation buttons can be pushed in the fol-
lowing two manners:
Short push: Push the button. (
Long push: Push the button for 1 second or
more. ( )
• The display unit depends on the destination.
Except for U.K.
Speedometer: km/h
Accumulated fuel consumption meter indica-
tor: L
For U.K.
Speedometer: MPH
Accumulated fuel consumption meter indica-
tor: GAL
"
"
)
MULTI-FUNCTION DISPLAY
1
2
3 4 5 6 7
Changing the display item
TIP
• The odometer will lock at 199999.
• The tripmeter will reset and continue counting
after 9999.9 is reached.
• The accumulated fuel consumption meter will
lock at 19.9.
1. Push the A button to change the meter dis-
play.
The display will change in the following order:
ODO  TRIP A  TRIP B  Clock  Timer
 Accumulated fuel consumption  ODO
TIP
To reset the digits, select the meter involved and
push the A button for 1 second or more.
EAM30621

SETTING THE TIMER

Putting measurement on standby
1. Change the meter display to the timer mode.
1-15
8 9